minimum instruction execution time 0.10 s (at 4.5 v to 5.5 v, 20 mhz) 0.238 s (at 2.7 v to 5.5 v, 8.39 mhz) 0.477 s (at 2.0 v to 5.5 v, 4.19 mhz)* 125 s (at 2.0 v to 5.5 v, 32.768 khz)* * the lower limit for operation guarantee for eprom built-in type is 2.7 v. interrupts ? reset watchdog external 0 external 1 external 2 external 3 (only 48-pin package) timer 2 timer 3 timer 4 timer 5 time base serial 0 a/d conversion finish timer counter timer counter 2 : 8-bit 1 (square-wave/8-bit pwm output, event count, synchronous output event) clock source 1/1, 1/4 of system clock frequency; 1/1 of xi oscillation clock frequency (only 48- pin package); external clock input interrupt source coincidence with compare register 2 timer counter 3 : 8-bit 1 (square-wave output, event count, generation of r emote control carrier, serial 0 baud rate timer) clock source 1/4, 1/16 of system clock frequency; 1/1 of osc oscillation clock frequency; external clock input interrupt source coincidence with compare register 3 timer counter 2, 3 can be cascade-connected. timer counter 4 : 16-bit 1 (square-wave/16-bit pwm output, event count , synchronous output event, input capture) clock source 1/4, 1/16 of system clock frequency; 1/1 of osc oscillation clock frequency; external clock input interrupt source coincidence with compare register 4 time base timer (one-minute count setting, independently operable 8-bit timer counter 5) clock source 1/4 of system clock frequency; 1/1, 1/8192 of osc oscillation clock frequency; 1/1, 1/8192 of xi oscillation clock frequency (only 48-pin package) interrupt source coincidence with compare register 5; 1/8192 prescaler overflow watchdog timer interrupt source 1/65536, 1/262144, 1/1048576 of system clock frequency (rom option) serial interface serial 0 : synchronous type/simple uart (half-duplex) 1 clock source 1/2, 1/4, 1/16 of system clock frequency; output of timer counter 3 i/o pins 27 common use: 16 specified pull-up resistor available input/output selectable (bit unit): 26 (for 44-pin), 25 (for 42-pin) i/o special ports buzzer output, remote control carrier signal output, high-current drive port a/d inputs 10-bit 8-ch. (with s/h) 12 common use specified pull-up resistor available input ram ( 8-bit) rom ( 8-bit) 8 k type mn101c425 package (conventional package) 16 k 0.25 k 0.5 k sdip042-p-0600c *lead-free , tqfp048-p-0707b *lead-free , qfp044-p-1010f *lead-free (sdip042-p-0600) mn101c427 mn101c425 , mn101c427 mad00002eem 14
mn101c425 , mn101c427 limit symbol condition min typ max unit idd1 f osc = 20 mhz, vdd = 5 v 15 40 ma idd2 f osc = 8.39 mhz, vdd = 5 v 6 18 ma idd3 fx = 32.768 khz, vdd = 3 v 100 a idd4 fx = 32. 768 khz, vdd = 3 v, ta = 25 c8 a idd5 fx = 32.768 khz, vdd = 3 v, ta = ? 40 c to +85 c18 a idd6 vdd = 5 v, ta = 25 c2 a vdd = 5 v, ta = ? 40 c to +85 c20 a parameter type MN101CP427DP , mn101cp427bf , mn101cp427ht rom ( 8-bit) 16 k ram ( 8-bit) 0.5 k minimum instruction execution time 0.10 s (at 4.5 v to 5.5 v, 20 mhz) 0.238 s (at 2.7 v to 5.5 v, 8.39 mhz) package [all lead-free] sdip042-p-0600c, tqfp048-p-0707b, qfp044-p-1010f (conventional package) (sdip042-p-0600) electrical characteristics supply current support tool eprom built-in type in-circuit emulator px-ice101c/d+px-prb101c42-qfp044-p-1010 px-ice101c/d+px-prb101c42-tqfp048-p-0707b px-ice101c/d+px-prb101c42-sdip042-p-0600 pin assignment operating supply current supply current at halt supply current at stop sdip042-p-0600c * lead-free (sdip042-p-0600) qfp044-p-1010f * lead-free tqfp048-p-0707b * lead-free mn101c425 mn101c427 mn101c425 mn101c427 mn101c425 mn101c427 txd,sbo0,p00 rxd,sbi0,p01 sbt0,p02 buzzer,p06 rmout,p10 p11 tmio2,p12 tmio3,p13 tmio4,p14 irq0,p20 irq1,p21 irq2,p22 p60 p61 p62 p63 p64 p65 p66 p67 nrst,p27 v ss osc1 osc2 v dd pa7,an7 pa6,an6 pa5,an5 pa4,an4 pa3,an3 pa2,an2 pa1,an1 pa0,an0 p80,led0 p81,led1 p82,led2 p83,led3 p84,led4 p85,led5 p86,led6 p87,led7 mmod 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 p64 p65 p66 p67 p70 nrst,p27 mmod led7,p87 led6,p86 led5,p85 led4,p84 led3,p83 led2,p82 led1,p81 led0,p80 an0,pa0 an1,pa1 an2,pa2 an3,pa3 an4,pa4 an5,pa5 an6,pa6 p63 p62 p61 p60 p22,irq2 p21,irq1 p20,irq0 p14,tmio4 p13,tmio3 p12,tmio2 p11 p10,rmout p06,buzzer p02,sbt0 p01,sbi0,rxd p00,sbo0,txd n.c. v ss osc1 osc2 v dd pa7,an7 34 35 36 37 38 39 40 41 42 43 44 22 21 20 19 18 17 16 15 14 13 12 33 32 31 30 29 28 27 26 25 24 23 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 37 38 39 40 41 42 43 44 45 46 47 48 36 35 34 33 32 31 30 29 28 27 26 25 p64 p65 p66 p67 p70 p71 nrst,p27 mmod led7,p87 led6,p86 led5,p85 led4,p84 p10,rmout p06,buzzer p02,sbt0 p01,sbi0,rxd p00,sbo0,txd xo xi v ss osc1 osc2 v dd pa7,an7 led3,p83 led2,p82 led1,p81 led0,p80 n.c. an0,pa0 an1,pa1 an2,pa2 an3,pa3 an4,pa4 an5,pa5 an6,pa6 p63 p62 p61 p60 p23,irq3 p22,irq2 p21,irq1,sens p20,irq0 p14,tmio4 p13,tmio3 p12,tmio2 p11 ( ) : conventional package mad00002eem 15
|
